The stickers we supply can be applied wet or dry, small stickers are probably
easier applied dry, just peel off the backing and apply. Larger stickers are
easier applied wet.
Mix a solution of water and a very small amount of washing up liquid, ideally in a
spray container.
Ensure that the surface to which the sticker is to be applied is clean and grease
free.
Place the sticker face down on a clean bench and peel off the backing substrate,
thoroughly wet the adhesive of the sticker (the wetter the better).
You can if you wish spray the surface to which you are going to apply the sticker
as well.
Place the sticker roughly in position. You should now be able to slide the sticker
exactly where you require it. Now squeegee out the water by covering the
sticker with the backing substrate (so as not to mark the sticker) and then by
using something like a credit card remove the excess water, starting at the
middle and working outwards.
Carefully dry the surface using a soft cloth or towel, leave to dry out and the
adhesive will be just as strong as if it were applied dry.
